Wi-Fyre Wireless LCD Transponder

Key Features
868 - 870 MHz operating frequency
Up to 30 field devices per transponder
6 modes of operation
Low operating current
Optional PC configuration

Overview

Wi-Fyre LCD Transponder

The Wi-Fyre Transponder has been designed to communicate with up to 30 mixed field devices such as smoke and heat detectors, manual call points, sounders and LED indicators, and input/output devices.

This version includes the LCD indication and control display.

The Wi-Fyre Transponder is small and easy to install. Commissioning is accomplished either using an inbuilt 5 button plus LCD panel front display, or via an optional Wi-Fyre PC interface card connected to a PC or laptop.


Approval Icon

Approvals

The Wi-Fyre LCD Transponder is fully approved by TUV for safe use and installation in any European Union country and bears the CE mark to show that it complies with all the applicable Directives including the CPR, EMC and the Low Voltage Directive (LVD).

Wi-Fyre Transponder Approvals


Tech Specs

Radio

Operating Frequency

868 - 870 MHz, 14dBm

Operating Channels

28

Field Devices (max)

30 per transponder

Range

150m open area

Electrical

Power Source

Addressable Loop, Conventional Zone and/or Auxiliary

Display

LCD

Local Control (optional)

5 Tactile push-buttons or PC connection

Zone In/Out Ratings

19 - 24Vdc, 400mA

Zone In/Out Terminal Alarm Resistance

Equivalent to 450 Ohm

Sounder In/Out Ratings (max)

8 - 24Vdc, 800mA

Auxiliary Supply Voltage (max)

19 - 40Vdc

Manual Alarm Relay Contact

1 x Solid-state normally open, 60Vdc, 600mA

Automatic Alarm Relay Contact

1 x Solid-state normally open, 60Vdc, 600mA

Common Fault Contact

1 x Solid-state normally closed (failsafe), 60V, 500mA

Cable Terminals

Rising clamp 1.5mm

Operating Current (nom.)

12mA

Configuration Interface

Local and/or Wi-Fyre PC interface

Environmental

Operating Temperature

-10 to +55°C

Ingress Protection

IP 54, for Indoor use only

Humidity

10 to 95% RH (non-condensing)

Mechanical

Dimensions (Width x Height x Depth)

234 x 164 x 75mm

Weight

620g

Housing Material

Polycarbonate

Colour

White

Cable Entries

6 x 20mm

General

Applicable Standards

EN54-25, BS 5839 Part 1:2002, ENTSI 300:220


Ordering Information

Part Code Description
10-001 Universal Wireless Transponder c/w LCD Indication & Control

Contact Us